Cartagena-Colombia-Travel

Members Login
Username 
 
Password 
    Remember Me  
Cartagena-Colombia-Travel -> business events -> How to install the Netgear EX2700 Setup via WPS?
Post Info TOPIC: How to install the Netgear EX2700 Setup via WPS?
KatherineeGomes


Newbie

Status: Offline
Posts: 1
Date:
How to install the Netgear EX2700 Setup via WPS?
Permalink   
 

Here is step by step guide:

1.Place the extender in the same room as the Wi-Fi Router.

2.Make sure you have a live internet connection coming from the main router. Also, make sure that the router is WPS capable.
Note: WPS does not support WEP Security. Change the security of your main router to WPA2-PSK(AES) for optimal performance.

3.Plug the extender into an electrical outlet and wait for the Power LED to become stable. If it does not turn ON, press the On/Off button on the side panel of the extender.

4.Press the WPS button for about 2 seconds on the side panel of the extender. The WPS LED blinks.

5.Within 2 minutes, press the WPS button on your main router.

For more information visit at: Netgear EX2700 Setup



__________________
petergroft


Veteran Member

Status: Offline
Posts: 54
Date:
Permalink   
 

To install the Netgear EX2700 Setup via WPS, you can follow these steps:

Connect the Netgear EX2700 to a power source and turn it on.
Locate the WPS button on the side of the extender.
Press and hold the WPS button for 2 seconds. The WPS LED will start blinking.
Within 2 minutes, press the WPS button on your router or access point.
The WPS LED on the extender will turn solid green when the connection is established.
You can now place the extender in a suitable location between your router and the area where you need to extend the Wi-Fi signal.

Greetings,
Peter

__________________
Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.
Cartagena-Colombia-Travel -> business events -> How to install the Netgear EX2700 Setup via WPS?


Create your own FREE Forum
Report Abuse 		Powered by ActiveBoard